MyAlarm iFob Control

By MyAlarm Pty Ltd

NOTE:

This app requires a appropriate security system and an interactive MyAlarm service plan to operate.

Contact your MyAlarm Registered Installer to discuss plans and choices earlier than buying the app.

DESCRIPTION:

The MyAlarm iFob Control app provides actual time management and feedback of suitable, IP enabled alarm techniques.

Reporting of alarm occasions via Push notification and e-mail can be obtainable if required.

Users can arm and disarm areas, control outputs and doorways, view system troubles and alarm system historical past as required.

All events performed by way of the app are recorded in the system history log.

App users are required to make use of their regular alarm PIN when utilizing the app allowing the alarm system to restrict the consumer to only capabilities, areas and doorways they've access to. Multiple sites are supported allowing simple interface to your home, workplace and vacation house and so forth if required.

Once on a MyAlarm service plan the system proprietor can create an account on the www.myalarm.com.au website, the place they'll assign access for as a lot as 10 iFob users for each alarm system. Various app functions could be restricted by the system owner if required giving them complete management.

If you are in doubt how to set these options contact your MyAlarm registered installer for assistance.

COMPATIBILITY:

The iFob app is currently only compatible with the panels listed beneath.

Most older version panels may be upgraded to fulfill the firmware requirements by your alarm installer.

If you wouldn't have one of many techniques listed then do not obtain the app.

PANELS:

* Bosch - Solution one hundred forty four Alarm Panel (via firmware upgrade to Solution 6000 v2.23 and higher)

* Bosch - Solution 6000 Alarm Panel (v2.23 and higher)

* Digiflex - Vision-X Alarm Panel (v2.23 and higher)

IP CONNECTIVITY OPTIONS:

* CM751 Ethernet module (v2.16)

or

* CM744 3G Radio module

or

*CP740 WiFi Enabled Graphic Keypad

REQUIREMENTS:

For the iFob Control app to operate your system wants to meet the compatibility necessities listed above.

Your system needs to have been installed and configured for MyAlarm companies and you will need to enroll in a MyAlarm service plan with your installer.

A MyAlarm Customer account is required to setup the iFob Control app customers on your system.

Contact your MyAlarm installer for extra information concerning your alarm system configuration and MyAlarm service plan options.

MyAlarm iFob Control Tags
Similar Apps

Description:

Mobile TTE is software program utility for distant administration of control panels produced by Teletek Electronics. The application is appropriate for every day operation by users offering:- Remote system Arming and Disarming. The consumer can select the arming mode (Full, Stay ...

Description:

iRISCO lets you remotely monitor and control your RISCO Group Security System from your Wi-Fi or 3G Android Smartphone or Tablet.With iRISCO you can arm/disarm your system, obtain intruder alarms along with event pictures for visible verification of alarms, take live pictures, activate ...

Description:

Please observe: The terms of use are totally visible solely in case the font measurement has been set to “Normal” or “small”. Please examine your device-settings. If the firmwareupdate was not processed correctly and the gaetway is shortly not reachable, disconnect the gateway from all ...

Comments